The RouterOS graphing is used for

What can be used as ’target-address’ in the simple queue?

Which of the following Routes statuses are possible?

In Winbox, Hide Passwords unchecked shows passwords for the following

Action=redirect allows you to make

PPPoE server only works within one Ethernet broadcast domain that it is connected to. And if there is a router between server and end-user host, it will not be able to create PPPoE tunnel to said PPPoE server.

When adding a static route, you must always ensure that you add both the gateway and the interface.

You have to connect to a RouterBOARD without any previous configuration. Select all possibilities to connect and do some basic configuration

log messages are stored on disk by default

For user in local ppp secrets/ppp profiles database, it is possible to

Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.

Firewall NAT rules process only the first packet of each connection.

MikroTik RouterOS commands can be run once a day by:

The connect-list is used by ROS to determine which access point a card configured in station mode is allowed to connect to.

/interface wireless access-list is used for

You can control bandwidth of a client connected to AP with the resource / interface wireless access-list ( assume the client uses MikroTik RouterOS).

One host on an internal network is accessing an external web page through a MikroTik router that is doing SRC-NAT. Select the correct statement about the packets that flow from that web page to the host ?

There are two routes in the routing table:
0 dst-addr=10.1.1.0/24 gateway=5.5.5.5
1 dst-addr=10.1.1.4/30 gateway=5.6.6.6
Which gateway will be used to get to the IP address 10.1.1.6?

For static routing functionality, additionally to the RouterOS ‘system’ package, you will also need the following software package:

Which firewall chain should you use to filter clients HTTP traffic going through the router?

What is the meaning of letter “R” on an active session in the menu PPP Active Connections?

Which is the default port of IP-Winbox?

PPP Secrets are used for

Using wireless connect-list it’s possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries

Can you manually add drivers to RouterOS in case your PCI Ethernet card is not recognized, and you suspect it is a driver issue?

It is possible to have PPTP Client and PPTP server on one MikroTik router at the same time.

An IP address pool can contain addresses from more than one subnet.

Which are necessary sections in /queue simple to set bandwidth limitation?

Which of the following protocols are proprietary to MikroTik

If a packet comes to a router and starts a new, previously unseen connection, which connection state would be applied to it?

Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?

For user in local ppp secrets/ppp profiles database, it is possible to

Using wireless connect-list it’s possible to prioritize connection to one Access Point over another Access Point by changing the order of the entries.

The highest queue priority is

In the Route List, the identification DAb for a route stands for

Which RouterOS packages should be installed on router for SSH server support?

For static routing functionality, additionally to the RouterOS ‘system’ package, you will also need the following software package:

Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use “/ppp secret” accounts from Router B to authenticate PPPoE customers.

The connect-list is used by ROS to determine which access point a card configured in station mode is allowed to connect to.

What is necessary for PPPoE client configuration?

MikroTik RouterOS commands can be run once a day by:

It is impossible to disable user “admin” at the menu “/user”

Mark correct statements.

Which of the following is true for connection tracking

It is required to make a web server on a private LAN visible on the Public Internet. Only the web server port should be visible to the public. Which of the following configuration steps must be met. (select all that apply)